The process of installing shelves mounted on the wall is simple. Like most construction tasks, it starts with planning and measurement. The wall mounted shelves are then fixed to the wall, either using drywall anchors for the very light duty shelves or attach directly to the underlying posts for shelves intended to carry more weight. Final touches are added to ensure stability and improve the appearance of the shelf.
When planning any permanent modifications to a home, start by taking careful measures and using mock-ups to simulate the changes. Before installing wall mounted shelving, it is a good idea to use cardboard shelves to give you an idea of what the finished project will look like. If you need the shelves to carry weight, identify the location of the posts behind the plaster or drywall because they will have to be anchored to the posts of the shelves or their supports. This will determine the placement of the support brackets and the shelves that rest on top of them. A ruler and level should be used to mark the wall to ensure that the creative shelving ideas are installed with even spacing and level.
Once the measurements are taken, it is time to mount the hardware support. Some shelving systems use metal strips that are attached to the wall, and then fit into adjustable metal brackets to hold the shelves. Other types of wall mounted racks use mounting fasteners to hold pre-assembled racks. However, others consist easily of brackets attached directly to the wall. In all cases, they will have to be wall installed shelves.
For low wall attached shelves, the attachment can be achieved with plastic billets installed in the holes drilled through the drywall. The anchors expand to grip the back of the wall when a screw is screwed through them. For shelves holding any actual weight assembly will involve the use of screws, ideally gypsum screws, to mount the support system directly to the underlying posts. Using a small drill bit to pre-drill a guide hole can be useful here.
After the mounting hardware has been placed on the wall, the shelves themselves can be installed. Pre-assembled units do not require additional work. Mounted on the wall of shelves supported by a bracket requires an additional step. For safety reasons, these shelves should be mounted on their support brackets, so they will not overturn or fall if pushed. Get notice on installing wall-mounted shelves first requires careful measurements. And also those measures should be taken with care in the construction of storage shelving ideas.